Transcontinental Metals stocks most standard metals. Please see our charts below for more information on stocked materials and products. |
|||||||||||||||||||||
|
Stocked Materials |
||
Aircraft Alloys | 8740, 4140, 4330, 4130, 17-22, 6150, 52100, 4620, H-11, 9310, 300MVM, 9310 | |
Nickel Alloys | A286, 718, 625, N-600, N-405, N-400, N-200, X-750, K-500, Waspaloy | |
Carbon | 1018, 1215, 1045, 12L14, Ledloy, Stressproof | |
Aluminum | 6061, 2024, 5052, 7075, 7050, 7475, 2219, 2124, and more... | |
Stainless | PH13-8, 15-5, 15-7, 17-4, 302, 303, 304, 309, 310, 316, 317, 321, 347, 403, 410, 416, 418, 420, 430, 431, 440, Custom 455, Nitronic 40, Nitronic 50, Nitronic 60 | |
Titanium | 6-4, 6-4ELI, 6-6-2, 6-2-4-2, 6-2-4-6, 10-2-3, 8-1-1, CP GR.1, GR.2, GR.3, GR.4, and more... | |
Brass/Bronze | ||
Var Alloy Steel | ||
Magnesium | ||
Brass/Bronze | ||
Duplex Stainless | UNS 31803 ETC. | |
Super Duplex Stainless Steels | UNS 32760 ETC. | |
Zirconium | 702 | |
Tungsten | ||
Plastic |
Bars (In Stock)
Round Bars | |
303 | 3/32" to 14.00" |
304/304L | 3/32" to 18.00" |
316/316L | 1/8" to 24.00" |
630 (17-4PH) | 3/16" to 16.00" |
630 (DH1150) | 1.00" to 14.00" |
410 | 1/4" to 16.00" |
410 (QDT) | 3.00" to 23.00" |
416 | 1/8" to 14.00" |
416 HT 26-32 HRC | 1/4" to 3.00" |
440C | 1/4" to 8.00" |
420 MOD | 3.50" to 8.50" |
2205/207 | 3/8" to 12.00" |
Accuracy Bar | 1/8" to 3.00" |
Bearing Quality | 1/8" to 3.00" |
Hex bars | |
303 | 3/16" to 3.00" |
304/304L | 3/16" to 3.00" |
316/316L | 3/16" to 3.00" |
416 | 3/16" to 2.00" |
347 | 1/2" to 2.00" |
Square Bars | |
303 | 3/16" to 3.00" |
304/304L | 3/16" to 3.00" |
316/316L | 1/4" to 3.00" |
Nickel Alloy Round Bars | |
Alloy 400 | 3/8" to 8" |
True Mill Flats HRAP (In Stock)
304/304L, 316/316L and 303 C.F.
Thickness | 1/8" to 2.00" |
Widths | 1/2" to 6.00" |
Sheared & Edged Flats (In Stock)
304/304L and 316/316L
Thickness | 1/8" to 1/2 " |
Widths | 1/2" to 8" |
Equal Leg Angle (In Stock)
304/304L and 316/316L
3/4"x3/4"x1/8" to 4"x4"x1/2" |
Unequal Leg Angle (In Stock)
304/304L
3"x2"x3/16", 3"x2"x1/4", 4"x3"x1/4", 6"x4"x3/8" |
Channels (In Stock)
304/304L
40mm x 20mm x 3mm | 50mm x 25mm x 3mm |
2" x 1" x 3/16" |
3" x 1 3/8" x 3/16" |
3" x1 1/2" x 3/16" |
4" x 1 3/4" x 1/4" |
4" x 2" 1/4" |
5" x 2 1/2" x 1/4" |
6" x 1.9" x 0.343" |
6" x 3" x 3/8" |
8" x 4" x 1/4" |
|
2" x 1" x 1/4" |
|
3" x 1 1/2" x 1/4" | |
5" x 1 7/8" x 3/8" |
|
6" x 3" x 1/4" | |
8" x 4" x 3/8" |
Half Rounds - Cold Finished (In Stock)
304/304L
5/8" and 3/4" |
Stainless Rebar (In Stock)
304/304L/304LN/316/316L/316LN/2205
In Straight Lengths 3mm (0.118") to 50mm (1.97") Mesh and Coil |
Also Available:
Mill Plate HRAP,
Tread Plate, Welded Pipe, Square, Rect., & Round Tubing, Nickel Alloy Forging Billets and more...
_______________________________________________________________________________________________
About Us | Stocked Materials | Specialty Materials | Processing Capabilities | Contact | Gold Star Grinding & Wire
© 2008 Transcontinental Metals. All Rights Reserved.
Use of this website and all of its contents signifies your agreement to the terms & conditions.